Which wheels will ft better?

[brickyard69]

Which wheels will fit better?

These are 18x10 (5.5 bs) 285 35 18 and 18x8 (4.75 bs) 245 40 18.
http://www.lateral-g.net/members/branham/

and these (Adam's car) are:

18x9.5 (5.5 bs) 275 40 18 and 18x8 (5 bs) 235 40 18
http://www.adfabdesign.com/Illusion/Wheels/Wheels.html

I like the American Racing ones better. I just don't know if 18x10 is to wide. I don't mind rolling or trimming the lip.

The other concern is that the rear end (8.5 10 bolt) is out of a Nova. I believe it is a different lemgth than the Camaro. I know I will need to do some measuring.

Thank you for any advice.

Steve

[MBD]

Which wheels will fit better?

These are 18x10 (5.5 bs) 285 35 18 and 18x8 (4.75 bs) 245 40 18.
http://www.lateral-g.net/members/branham/

and these (Adam's car) are:

18x9.5 (5.5 bs) 275 40 18 and 18x8 (5 bs) 235 40 18
http://www.adfabdesign.com/Illusion/Wheels/Wheels.html

I like the American Racing ones better. I just don't know if 18x10 is to wide. I don't mind rolling or trimming the lip.

The other concern is that the rear end (8.5 10 bolt) is out of a Nova. I believe it is a different lemgth than the Camaro. I know I will need to do some measuring.

Thank you for any advice.

Steve

If I was limited to those two choices, I would go with the second set. The 10s on the first set are too far outboard and look like they'll rub.

[brickyard69]

Does anyone know the guy with the first car?

[Rybar]

I'm running 18x10's with 5.75" BS out back, and there is no way they will fit unless you roll the lips and clearance the wells slightly with a hammer.

The 1st look like they will have rubbing issues for sure. The 2nd set I doubt will have any problems at all.

[jigga99]

adams back spacing is what i run no problems!!