Results 1 to 2 of 2
Thread: brake booster question
-
03-05-2006 #1
Starting The Transformation
- Join Date
- Mar 2005
- Location
- chester Md
- Posts
- 300
brake booster question
I have to remove my brake booster to install the 6 speed conversion. I was thinking while I have it off, I should replace it. (engine compartment looks great, besides rusted up booster.
My question is, I plan to upgrade my factory brakes to Wilwood or baer setup. Do I need anything special for the 4 wheel disc setup, or will the stock booster still funtion properly..
-
03-05-2006 #2
Registered User
- Join Date
- Aug 2004
- Location
- NJ
- Posts
- 1,295
The stock replacement booster should work just fine. When you purchase one of those kits from either Baer or Wilwood, Their kits are very complete. The usually come with a new master cylinder, and a proportioning valve.
I have the Baer set up and retained my factory booster. Now I'm in the process of switching over to a Hydroboost set up, just for packaging reasons.
Hope this helped!
John
Reply With Quote
