Turbobuick
02-22-2026, 03:01 PM
To many projects not enough time!
There was over $100k spent on this build and it was never fully finished. I got it off a friend of mine with big plans to finish it. I am planning to sell it as a roller since most will probably want to do a LS swap. I am also keeping the factory Grand National seats. This would make a nice and easy project to finish. I have all the trim some very nice some will need re-done, paint and body are really nice but paint has a few issues that will need addressed, zero rust anywhere. I have a NOS rear panel trim piece which is really rare and difficult to find. Custom interior really nicely done with custom center console with gauges. Wiring looks decent and is all new. This car actually runs and drives and everything works as it sits now. Rides pretty nice too. I am willing to sell the car whole with the Buick V6 which is capable of making close to 1000hp with the 200r4 transmission.
Complete pro-touring chassis, the frame was custom made square tube from the firewall back with 4 link style rear suspension with a pro-touring style roll bar and full rear tub and 20gal fuel cell 12 bolt rearend Baer brakes and coil overs at all four corners, Power rack and pinion steering and a full Detroit speed front suspension and coil overs. Wheels are off a Corvette Grand Sport 17" with 295s on the rear and 275 on the front. Located in Youngstown Ohio $35000
21983121982321982421982521982621982721982821982921 9830 21983121982321982421982521982621982721982821982921 9830
219822219832
There was over $100k spent on this build and it was never fully finished. I got it off a friend of mine with big plans to finish it. I am planning to sell it as a roller since most will probably want to do a LS swap. I am also keeping the factory Grand National seats. This would make a nice and easy project to finish. I have all the trim some very nice some will need re-done, paint and body are really nice but paint has a few issues that will need addressed, zero rust anywhere. I have a NOS rear panel trim piece which is really rare and difficult to find. Custom interior really nicely done with custom center console with gauges. Wiring looks decent and is all new. This car actually runs and drives and everything works as it sits now. Rides pretty nice too. I am willing to sell the car whole with the Buick V6 which is capable of making close to 1000hp with the 200r4 transmission.
Complete pro-touring chassis, the frame was custom made square tube from the firewall back with 4 link style rear suspension with a pro-touring style roll bar and full rear tub and 20gal fuel cell 12 bolt rearend Baer brakes and coil overs at all four corners, Power rack and pinion steering and a full Detroit speed front suspension and coil overs. Wheels are off a Corvette Grand Sport 17" with 295s on the rear and 275 on the front. Located in Youngstown Ohio $35000
21983121982321982421982521982621982721982821982921 9830 21983121982321982421982521982621982721982821982921 9830
219822219832