Results 1 to 3 of 3
-
12-05-2023 #1
Registered User
- Join Date
- Oct 2021
- Location
- Lake Stevens, WA
- Posts
- 65
C4 SLA/IRS suspension in a 3rd gen Camaro Z28
As the title says, I installed the suspension from a 92 Corvette into my 84 Z28. There are many 3rd gens with the rear IRS, but this is the only one that has the front SLA also. All of the engineering, design, and fabrication was done by myself in half of a 2 car garage, no lift, or frame table. The front frame rails were sectioned and new rail inserts were installed at a 13 degree angle and a custom built K-member was fabricated in order to accommodate the LS engine and the Rack and Pinion from a 4th gen Camaro. Once the suspension was installed it was converted from transverse leaf springs to full coil-overs on all four corners. This was not an easy bolt in endeavor, but required a lot of custom fabrication and engineering. Like the saying goes if it was easy, then everyone would do it. This is truly a one of a kind build.
-
12-06-2023 #2
Registered User
- Join Date
- May 2017
- Posts
- 225
Very Nice work!
12-06-2023 #3
Registered User
- Join Date
- Nov 2006
- Location
- Mountain Springs, Texas
- Posts
- 4,870
Yes, nice work!
1969 Camaro - LSA 6L90E AME sub/IRS
1957 Buick Estate Wagon
1959 El Camino - Ironworks frame
1956 Cameo - full C5 suspension/drivetrain
1959 Apache Fleetside
Reply With Quote
