The Brake Man F4 calipers on a Ford 9 inch

[GM Man]

Building a 67 Camaro and have a No Limit Engineering Sniper IFS front subframe under my Camaro. It has The Brake Man F4 calipers up front and I would like to use the same calipers for the rear Ford 9 inch axle. I've been in touch with The Brake Man peeps on bolting it up to a 9 inch, but they only offer a drag kit, nothing for a pro touring/auto crossing kit. Anyone have any ideas on how to make some F4 calipers work on a 9 inch rear axle with a solid rotor? TIA

[dontlifttoshift]

I'm pretty sure the F4 brakes use the same lug mounts as the Wilwood Dynalite so conceivably you could buy all the parts and pieces for a Wilwood setup and run the Brake Man calipers.

[GM Man]

I'm pretty sure the F4 brakes use the same lug mounts as the Wilwood Dynalite so conceivably you could buy all the parts and pieces for a Wilwood setup and run the Brake Man calipers.

Ohh thats some good news.. Thank you for that Donny! I did get in touch with one of The Brake Man reps who spec'd the calipers for No Limit Sniper IFS and he told me that the F4 calipers has a 3.50" mounting pattern. He also recommended a caliper with a 1.50" pistons for the rear brakes. So I'll be going with that and once I get it all mocked up and on I'll take some pictures and post it up here.

Now to figure out the WMS to WMS measurement.