Correct wheel size 68 Camaro with DSE Quadrilink

[ERICR]

Hello all I am building a 68 Camaro. I have a SpeedTech subframe that can fit a large front wheel. I am putting in a DSE quadrilink with stock wheel wells and a Strange 12 bolt that is about 1/2 inch narrower than stock.
Any one successful in putting an 18x10 wheel in the rear with DSE suspension and stock wheel wells? What back spacing to did you use?
The rear and suspension is going in now, but I need to get wheels ordered asap.

thanks in advance

[TheJDMan]

First, Welcome to PT! With stock wheel wells you are pretty much limited to a 275/35-18 tire on a 9.5 wheel but there are just far too many variables to give you a hard numbers. Your best bet is to start reading through some of the wheel tire threads and get an idea of what others have done. There are a lot of members here who are not running mini-tubs so lots of builds that would be similar to yours. Here is a current thread discussing your very question.

https://www.pro-touring.com/threads/93857-Widest-wheels-on-a-67-68-Camaro-without-tubing-it