Baer 13" 2 piston

[La68camaro]

im thinking about the baer 13" 2 piston for my 68 it wont see much of a track but i definatly want good stopping power, think the 1k price tag is worth it? here's a link if you know of a better price let me know!



http://cgi.ebay.com/ebaymotors/67-69...spagenameZWDVW

[chicane67]

Touring Classics ......... do I need say more ??

Give Noel a call.

[La68camaro]

looks like a good kit for the price, saves 200 bucks too thanks!

[rocketrod]

This place has the best prices on Baer products I have seen. My front kit was about $200-$250 cheaper than the price listed in your original post.

TByrne Motorports
1227 Horseneck Road
Westport, MA 02790
tbyrnemotorsports

[Dagger]

I'll second the vote for TByrne.

[La68camaro]

What about a cheap place to find 13" 4 pistion breaks from wilwood?

[BMullin]

We have a full bolt on Wilwood Big Brake upgrade for your 68 Camaro for 814.95. With the ss lines the cost will be 884.90. The kit comes with:
Brackets, Caliper Mounting (pair, one each, left and right)
Washer, 1/2 x 0.09 inch Thick
Spacer, 1 x 0.493 inch Thick (use with disc brake spindle only)
Washer, 1/2 x 0.02 inch Thick
Bolt, 1/2-20 x 3.0 Long, FHCS
Washer, 5/8 x .05 inch Thick
Bolt, 5/8 x 18 x 1.12 Long, FHCS
Bolt, 5/8 x 18 x 1.62 Long, FHCS (use with disc brake spindle only)
Stud, 1/2-20 x 1.75 Long, SHCS
Hub Assembly
Cone, Inner Bearing
Seal, Grease
Adapter, Rotor
Rotor, .81” Thick x 12.19” Dia, 8 x 7.00” Bolt Circle
Rotor, Drilled and Slotted (pair, one each, left and right)
Bolt, 5/16-18 x 0.75 Long, Hex Head
Washer, 3/8 inch
Bolt, 3/8-16 x 1.0 Long, Torx Head
Cone, Outer Bearing
Washer, Spindle
Cap, Dust
O-ring
Caliper, Forged Dynalite
Caliper, Forged Dynalite, Polished
Washer, Lock, 3/8 inch
Bolt, 3/8-24 x 1.25 Long, Hex Head
Shim, 0.032 inch Thick
Pad, BP-10, Axle Set
Pin, Cotter

If you want to chat more about this system or a similiar one please PM me
Thanks
Billy

[Roger Poirier]

Good luck from Baer! Very poor service and you will wait at least 3 months for your order. Try other companies that sell brakes on this forum.

R.P.

[DeepBlue68]

Yea, I bought their (Baer's) track (13") / touring (12") full 4-wheel disc brake kit for my 68 Camaro, and I wasn't exactly blown away by their customer service. I haven't installed it yet, but it seems to be good quality though.

[Roger Poirier]

Do problem with the quality either. Top notch. Just poor customer service. Wrong axle plates, did not send my B-body spindles, they had to ship them out via Air next day. Missing misc. small parts. Simply a pain!

When you pay that kind of money, proper service should be part of the deal.

R.P.

[David Pozzi]

I wouldn't use a .81" thick rotor, a 1.250X12.19 rotor would be ok.