MoparDude
10-27-2017, 11:20 PM
Guys,
I'm looking for someone that knows the 727/46RH trans operation really well.
For a while I've been wanting to make a full solenoid control valve body for these transmissions.
I am able to program a microcontroller to control the shifting, which I already do with my own 46RH (electrical engineer), but of course gears 1 to 3 are still hydraulic.
Could use the same solenoid type as the 46RH uses but for all gears and the lockup.
I have access to CNC machines so I am able to fabricate a new valve body to suit the new application.
I'd make it with two control modes selectable from a dash switch. One mode full auto up and downshift and mode 2 with paddle shifters full manual control.
Sensor inputs from engine rpm, manifold vacuum/pressure, car speed, throttle position.
Anyone out there willing to help out ???
I'm looking for someone that knows the 727/46RH trans operation really well.
For a while I've been wanting to make a full solenoid control valve body for these transmissions.
I am able to program a microcontroller to control the shifting, which I already do with my own 46RH (electrical engineer), but of course gears 1 to 3 are still hydraulic.
Could use the same solenoid type as the 46RH uses but for all gears and the lockup.
I have access to CNC machines so I am able to fabricate a new valve body to suit the new application.
I'd make it with two control modes selectable from a dash switch. One mode full auto up and downshift and mode 2 with paddle shifters full manual control.
Sensor inputs from engine rpm, manifold vacuum/pressure, car speed, throttle position.
Anyone out there willing to help out ???