What do you think? My Setup

[GBodyGMachine]

Spohn 1 5/16" Front swaybar
Spohn 1" Rear Swaybar
Spohn Lower Control Arms(Coilover Mnt)
BMR Upper Control Arms
QA1 Front Coilovers (GBody Boltin)
QA1 Rear Coilovers (DR4000K)
HomeMade Double Adj REAR UCA's (Spherical Rod Ends)
HomeMade Tubular REAR LCA's (Solid Bushings)
Moog Frontend Rebuild Kit (Idler,Cntr Lnk, In-Out Tierod)
Dixie 2" Drop Spindles
99 Z06 Wheels (Black 18x9.5 & 18x10.5
W/ 265/40 and 295/35)

Thats the plan for now. I will have bigger brakes and power steering as well. Did I miss anything major? And what do you think?

JEff

[GBodyGMachine]

Anyone?

JEff

[white79bu]

Sounds good. But how do you get zo6 wheels to fit under a g-body? Do you have any pictures? Andy

[Travis B]

Sounds good. But how do you get zo6 wheels to fit under a g-body? Do you have any pictures? Andy

It will take some spacers to get them to fit right......

I am not real familiar with G-body stuff but it all looks good!

[GBodyGMachine]

Spacers and a frame notch to be exact

JEff

[TPI Monte SS]

The only thing I'd advise against is the drop spindles. Go with drop springs, you'll be much happier with the ride quality in the long run.