Window carrier/operator/bushing adjustment?

[TomsResto]

Can anyone point me to a good reference on the inner workings of window operator, scissor carrier (assuming it's scissor style), bushings, etc for a Gen1 camaro driver's side window? If nothing else I try the ol' "Google It" approach, but given the forum is a wealth of knowledge I figured I'd try to cut to the chase of information others here have found to be most accurate/useful.



Ideally looking for something that can walk me through removing the door panel, etc. would be helpful as well to avoid some trail & error mistakes. In a perfect world something that labels parts and identifies when something is in need of replacement would be ideal so I know what I'm trying to order up to fix rather than calling into some of the sponsors of this site and saying "I think I need the little white doohickie thing that's under the grey'ish thingamabob, you know inside the kinda funny shaped bracket"

The passenger side windows seem to seal up pretty good, but the driver's side isn't so much... with both driver side windows rolled up the wind still whistles in, I put a beach towel on the driver's seat when washing because I know there is a small void that water can get in, etc.

In attempting to diagnose I notice that with the driver's window rolled up and door open if I grab the back top corner of the glass and give her a wiggle it moves around noticeably more than the passenger side when performing the same procedure.

Thanks!

-Tom

[hifi875]

following.....

[ccmc]

If I remember correctly, the assembly manual or the chassis manual has the diagrams and adjustment process with pictures. Google camaro AIM (assembly instruction manual)

I think the camaro forum on camaros.net has the pictures too.

Rick