Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5
    1. #1
      Join Date
      Jun 2014
      Location
      California
      Posts
      83
      Country Flag: United States

      Vintage AC first gen camaro question....

      Can any of you post some pictures of how you extended the ac lines that run from your under dash unit over to the far passenger side. Im using the vertical firewall bulk head connector. Ive ordered several EZ clip fittings and hose. Im kind of winging it but would love to see how others have done it. Ive googled and it just doesnt seem to come up. The majority of cars are not using the lame set up that comes with vintage air. Vintage air directions also leave a little to be desired. Thanks hoping to get some good feedback!



    2. #2
      Join Date
      Jul 2016
      Posts
      348
      Country Flag: United States
      Rick I just recently installed my inline VA bulkhead. I'm using Old Air (brand name) 90* heater fittings, part# 91-737H. My bulkhead is not as far over to the pass side as some guys install them, so I had to use 90* fittings. The key here is where exactly did you install your bulkhead ??

    3. #3
      Join Date
      Oct 2007
      Posts
      1,872
      Quote Originally Posted by Rick2964 View Post
      Can any of you post some pictures of how you extended the ac lines that run from your under dash unit over to the far passenger side. Im using the vertical firewall bulk head connector. Ive ordered several EZ clip fittings and hose. Im kind of winging it but would love to see how others have done it. Ive googled and it just doesnt seem to come up. The majority of cars are not using the lame set up that comes with vintage air. Vintage air directions also leave a little to be desired. Thanks hoping to get some good feedback!
      you mean the high an low side lines? pretty basic if so.. -10 line is a 45 and and 90 about 12 inch of line, -6 side is a 90 and a 90 about the same amout of line..
      From a place you will not see comes a sound you will not hear....

      67 Camaro In progress

      https://www.pro-touring.com/showthre...-Tap-67-camaro

    4. #4
      Join Date
      Sep 2010
      Location
      Benicia, Ca.
      Posts
      4,131
      Country Flag: United States
      If you are running the EZ-Clip hose kit you should have been told about/looked at the II Much Fab Billet pass through bulkhead as it is made specifically for that hose kit!

      That is by far the best option IMO. With a conventional bulkhead, you have 8 connections to possibly leak and install is much more difficult.

      Here is a link to the II Much on VA's website: http://www.vintageair.com/2017%20Cat...talog%2078.pdf

      Matt
      MCB - Matt's Classic Bowties
      5360 Gateway Plaza Dr.
      Benicia, Ca. 94510
      866-628-8746
      TEXT ONLY: 925-989-9091 (Replied 8-4)
      www.mcbparts.com

      Email: [email protected]
      Like us on Facebook for exclusive offers, info and chat: www.facebook.com/mcbparts
      Hours: Monday to Friday 8am - 4pm Pacific
      We ALWAYS enjoy talking to our customers!
      We have a full time staff to answer ALL Questions, Tech Support or Order Status Tracking!

    5. #5
      Join Date
      Sep 2009
      Location
      Atlanta,Ga.
      Posts
      182
      I went with this device.
      Attached Images Attached Images  
      I am SUCH a rookie to Pro-Touring




    Advertise on Pro-Touring.com