PDA

View Full Version : Holley Hi Ram


Jacobb55
07-03-2016, 10:52 AM
Hey Guys,

I am building my 55 chevy truck, TCI built the chassis for it and I am running an LS3, I am wanting to run Holleys 105mm Hi Ram Intake but am very unsure if it will fit under the hood. All I am working with right now is a bare chassis so don't really have much of a way to measure it. Any advice is greatly appreciated.

Thanks
Jacob
andrewb70
07-28-2016, 03:30 PM
Hey Guys,

I am building my 55 chevy truck, TCI built the chassis for it and I am running an LS3, I am wanting to run Holleys 105mm Hi Ram Intake but am very unsure if it will fit under the hood. All I am working with right now is a bare chassis so don't really have much of a way to measure it. Any advice is greatly appreciated.

Thanks
Jacob

Jacob,

You need to have a dummy block installed into the chassis, then you can use the measurements provided by Holley for the Hi-Ram.

Andrew