Please help! Will they fit question..1966 Chevelle

[Dustin_R]

I have called around and cannot get a good answer if these wheels will fit. I have a 1966 Chevelle Malibu. This is for a cruiser, so I am not opposed to wheel spacers if necessary, thanks for the help.

Front: 19x9 5/120.65 ET50 CB70.MM

Rear: 20x10 5/120.65 ET37 CB70.MM

[HotRod47]

I'm no expert, but I think they are too wide. On my 66 I have 20x8.5's with a 255 tire and they are stuffed into the stock wheel well. The fronts, maybe depending on offsets. Although mine is low in the front and with a 18x8 they still rub just a touch on certain turns.

[csouth]

I have called around and cannot get a good answer if these wheels will fit. I have a 1966 Chevelle Malibu. This is for a cruiser, so I am not opposed to wheel spacers if necessary, thanks for the help.

Front: 19x9 5/120.65 ET50 CB70.MM

Rear: 20x10 5/120.65 ET37 CB70.MM

That's like 7.2" of backspace on both. You will most likely need spacers, but will that give you enough wheel to fender clearance?

[Dustin_R]

Thanks for the replies guys, I'm going to buy a set of Rushforth wheels. Mods please delete.