Results 1 to 8 of 8
-
07-05-2015 #1
Registered User
- Join Date
- Jan 2008
- Posts
- 87
DSE mini tubs... Interior modifaction of the quarter trim panels
Hey guys, I had the dse mini tubs done on my 70 Camaro and close to putting the interior together. Does anyone have a how to/tips on modifying the interior quarter trim panels? The included manual is very vague, says to add 2" of material to allow for clearance... Ok, seriously... was that a how to guide for somebody whose done it 100x? lol
Any more details, and how to properly finish etc would be
-
07-06-2015 #2
Registered User
- Join Date
- Sep 2005
- Location
- Chit-ca-go
- Posts
- 472
I asked a while back and Jerry posted how he did it.
https://www.pro-touring.com/threads/...rim?highlight=1971 Firebird
2017 Slipstream SS
07-06-2015 #3
Registered User
- Join Date
- Jan 2008
- Posts
- 87
Perfect! Thank you... Somebody got it to fit without modificatio... Wow lol
Originally Posted by cpd004
07-07-2015 #4
Registered User
- Join Date
- Sep 2005
- Location
- Chit-ca-go
- Posts
- 472
I tried that too, but it didn't look right. Originally Posted by tbal
1971 Firebird
2017 Slipstream SS
07-09-2015 #5
Registered User
- Join Date
- Jan 2008
- Posts
- 87
Wish I could just send all the stuff to somebody and they could do it for me lol
07-10-2015 #6
Registered User
- Join Date
- May 2011
- Location
- NORTH JERSEY
- Posts
- 33
Project has been on hold for a while , I've been in the hospital and before that Ive been building a new house at the beach ( thanks hurricane SANDY) The car is now on the back burner.
07-22-2015 #7
Registered User
- Join Date
- Jan 2008
- Posts
- 87
So ended up giving my seats to a shop...
Rear backrest having it shortened 2" on each side (as per dse manual)
How about the seat pads r/l? Dse doesn't mention anything about modifying these but they sure don't fit with the tubs... Do these need a 2" section taken out from the middle or what?
07-24-2015 #8
Registered User
- Join Date
- Jan 2008
- Posts
- 87
Anyone
Reply With Quote
