Hmmm hydroboost with Wilwood master and Wilwood prop valve won't clear fender well

[cactuss4]

So I've got my parts and just working on fitment. What I found out quickly is that on my 66 chevelle, I can't use the Wilwood prop valve + bracket as it won't clear my inner fender well..




The prop valve holds the master cylinder up over a 1/2" if not slightly more. I already have 90 degree bends on there so that's not going to help. Is there a different mounting bracket or how does one get this mounted?

I guess I could bang my inner fender wells and make a valley (well maybe I can!), but was wondering if there are other options, I'm sure folks have run the hydro boost with the Wilwood prop valves in an A body, with inner fender wells in place and I'm sure some of those folks have about as little talent as I in making stuff, that may have found a solution?

Well what if I bent the bracket towards the car and had the prop valve ride at a 45degreen angle against the fender well (would mean making new input lines), hmmm

Thanks
Tory