Results 1 to 3 of 3
-
03-19-2015 #1
Registered User
- Join Date
- Feb 2013
- Location
- South Carolina
- Posts
- 935
Need help with 69 Impala rear disc conversion
I'm part way through installing a SSBC rear kit with 12" discs and am not sure about the caliper mounting bolts. Are they too long?
The pictures show what I have on hand and I get that as long as it doesn't interfere with the disc or pads I'm ok, this just seems excessive.
Would I be ok adding another washer?
-
03-19-2015 #2
Registered User
- Join Date
- Feb 2013
- Location
- South Carolina
- Posts
- 935
Help?
04-09-2015 #3
Registered User
- Join Date
- Jan 2006
- Location
- Oregon
- Posts
- 1,773
Yes, those fasteners appear overly long for the application, assuming that you've assembled everything correctly. You don't really need or want the fastener to protrude through the pad abutment bracket by more than 1-2 threads IMO. I would confirm that your caliper/rotor alignment is correct first, then address the fastener issues, since any spacers (if they're needed) will change those requirements.
Tobin
KORE3It's what I does.
Reply With Quote
