kman67rsss
10-07-2005, 07:58 PM
I am gonna start working on installing my line locks now that my rear end is straightened out. ive gotta go from my dist. block to a "T" fitting to the solenoid to another "T" fitting with my original lines. my question is can i eliminate the 1st "T" and plug one of the holes in the dist. block and run one line to the solenoid, then go to a "T" with the original lines? or do i have to run 2 lines from the ports on the dist block to the "T" through the solenoid etc. etc. thanks