How can I tell which side this UMI upper goes on ?

[Paraman1]

I have a UMI set of UCA's and I put the drivers side together yesterday but while comparing the upper I pulled off with the one that was left I am thinking I may have put the wrong upper on the drivers side ?
Here is a picture .

Is this the replacement upper for the factory part pictured or for the other side ? The instructions had an angled picture of the parts that are kind of tough to tell which is which . Thinking maybe they should invest in a D and a P stamp to make it easy for us mouth breathers

[Schwartz Performance]

Looks to me like those are opposite sides.

-Dale

[Paraman1]

Thanks Dale , I just started second guessing myself when I had them sitting side by side . I had read a few other posts where guys had mounted their uppers on the wrong side and now I know why as they look an awful lot alike to guys who don't do this everyday ... LOL

[BMR Sales]

Looks incorrect to me - these should produce additional Positive Caster and it looks like you would have Negative Caster as Installed

[UMI Tech]

Sorry for the delay. The one in the photo is the passenger side upper. The bisected tube goes toward the rear.

Those arms should produce 5-6 degrees positive caster and one degree negative camber easily.

You can always PM or email me for a quick response.

Thx

-- Ramey

[Paraman1]

Thanks , Ramey . I kept meaning to e-mail you guys but between work , my Daughter starting college and my computer acting up just never got to it . Thanks for taking the time to answer my question on the forum .

Still think a D and a P stamp would help those of us who struggle