1st gen help: brake booster studs

[68birdls1]

Hey guys, well I was about to mount my ATS firewall bracket yesterday, and when I took off my booster I realized that someone had removed the studs that held the booster in place. Looked into it some more and I found out that one of the previous owners had cut out that piece of medal and welded in new.

So with all that being said, can anyone shoot me some measurements on how far down and over the original studs sit? I would really appreciate it. Thanks

Daniel

[MCB Matt]

Its going to be SO much easier to pickup a used bracket off a car someone is parting... Its a piece that usually doesn't sell so a lot of guys have them laying around, i used to have hundreds of them...

Post up an ad in the wanted section, i'm sure someone will just about give you one!

Matt

[68birdls1]

Thanks for the response, I ended up finding a bracket and got the measurements from a junk yard. All good to go. Thanks looking out though!

[MCB Matt]

Thanks for the response, I ended up finding a bracket and got the measurements from a junk yard. All good to go. Thanks looking out though!

Great, nice to get a snag out and move forward!

Matt