Results 1 to 3 of 3
Thread: Power Steering Hardline
-
07-27-2014 #1
Registered User
- Join Date
- Jan 2010
- Posts
- 212
Power Steering Hardline
Hey guys, I saw a car at a car show(see picture below) that had the pressure and return stainless steel hardline coming off the steering box and then they ran a section of hose from that to the power steering pump. I want to run a section of hardline so that I can keep the lines off my headers. Is it safe to use stainless steel line on the pressure side? If this is ok to do, will these sleeves and nuts be ok to use? Also, what size hardline would you use?
http://www.jegs.com/i/Earls/361/561906/10002/-1
http://www.jegs.com/i/Earls/361/561806/10002/-1
-
07-27-2014 #2
-Moderator-
- Join Date
- Apr 2001
- Location
- Central CA USA
- Posts
- 6,114
Thos will work in -6 size. The pressure hose absorbs the pump pulses, so use as long a hose section as possible.
David Pozzi http://www.pozziracing.com67 Camaro RS that will be faster than anything Mary owns.
07-27-2014 #3
Registered User
- Join Date
- Jan 2010
- Posts
- 212
Thanks David for the help.
Reply With Quote
