Results 1 to 4 of 4
Thread: bmr / solid body mounts
-
07-15-2014 #1
Registered User
- Join Date
- Jun 2014
- Location
- braintree essex england
- Posts
- 134
bmr / solid body mounts
hello all. I am In the process of fitting the bmr torgue arm kit to my 79 trans am. I have solid body mount fitted but where the bmr brackets fit to the rear clip they have supplied polly mounts will this cause me any problems with the other 4 solid mounts on the clip . cheers kev
-
07-16-2014 #2
Registered User
- Join Date
- Sep 2005
- Posts
- 49,371
Kev, Are you talking about the Bushing/Mounts on the Cross Member/Front SubFrame? If so, the ones we supplied you with are made out of Delrin not Polyurethane. The Control Arms would have Poly Bushings which should not give you any problems.
T.C.
07-16-2014 #3
Registered User
- Join Date
- Jun 2014
- Location
- braintree essex england
- Posts
- 134
thanks for the reply I thought they where polly sorry misunderstanding my end. just did not look like my alloy ones. cheers kev
07-16-2014 #4
Registered User
- Join Date
- Sep 2005
- Posts
- 49,371
Kev, Delrin is a Milled Co-Polymer with a Very High Durameter Rating. Not as Clunky as an Alloy but a very solid piece.
T.C.
Reply With Quote
