Dash warning lights

[Boony405hp]

Hey guys,

What is everyone using on their custom dashes for warning lights?

Trying to find a good source, any lights that come with custom logos?

Cheers, dave.

[MCMLXIX]

I found that Harley (and the after market) make just such a light... Not overly expensive and seem to be readily available. Just thought I would share ...

Turn Indicator.............. Factory P/N: 68021-92A ...... Biker's Choice P/N: 48-2649
Hi Beam Indicator......... Factory P/N: 68023-92A ...... Biker's Choice P/N: 48-2648
Oil light Indicator.......... Factory P/N: 68020-92A ...... Biker's Choice P/N: 48-2650
Neutral Indicator ......... Factory P/N: 68024-92A ...... Biker's Choice P/N: 48-2646

https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif

[astroracer]

The '56 wagon I just bought had LED's in the custom dash. I just replaced both turn signal bulbs because one was burnt out. I got the replace LED's at Radio Shack for a couple bucks apiece. Delcity also has them for a bit cheaper but you pay for shipping...
Mark

[Aficionado]

Try Vehicle Wiring Products out of the UK. When I did a custom switch plate for a nitrous install I used some stuff from them and another British company ....think it was Stafford. A quick bing search will pop both of them up. Shipping wasn't terrible.

JC

[scott_fx]

i just picked up a couple of these with the black surround (green for directional, amber for engine warning)
http://www.oznium.com/led-indicator-light
thinking about adding a small oled screen for any other information i need to display
http://www.adafruit.com/products/938

[MCMLXIX]

The problem with LEDs are they are extremely bright. If they are the standard dome shape, you can file them flat and it will diffuse the light. I like the Harley lights because the have universal symbols.

[scott_fx]

The problem with LEDs are they are extremely bright. If they are the standard dome shape, you can file them flat and it will diffuse the light. I like the Harley lights because the have universal symbols.

yeah most are, but the ones i got are indicator leds so they aren't super bright and focused. if they are too bright I'll just add a resistor to tame them a bit.

[astroracer]

The indicators I got at Radio Shack already have a resistor to tame them down. They are perfect in the briteness range.

[rustbucket69]

I came across these a while back. Unfortunately, not local (US) but they seems pretty nice.

http://www.snakebite.com.au/logodashboardwarninglightassemblyeach-p-494.html

[CROMAN69Z28]

Just found these so I figured I would bring this thread back up to the top. I like the design. US company to boot.
http://www.newvintageusa.com/panels.html

[cpd004]

Bringing this back up to see if anyone has found something in the US with logos. I need a brake and check engine light.