Results 1 to 6 of 6
-
06-13-2014 #1
Registered User
- Join Date
- Dec 2004
- Location
- California
- Posts
- 794
Recommendations for disc brake powder coating?
I want to get my calipers powdercoated somewhere down the line, are there any recommended places out there or any site sponsors?
-
06-14-2014 #2
Registered User
- Join Date
- Apr 2012
- Location
- Woodstock, IL
- Posts
- 2,410
Recommendations for disc brake powder coating?
You could have Jet Hot coat them, or any local powdercoat shop will do them. Just disassemble them yourself
-DaleSchwartzPerformance
The leader in bolt-in muscle car chassis
SchwartzPerformance.com | GMachineChassis.com | Facebook | Twitter | Instagram
Dealer for: Forgeline, RideTech, Tremec, American Powertrain, Silver Sport Transmissions, GM Performance Parts, RECARO, Cerullo Seats, TMI Products, Vintage Air, Baer Brakes, Wilwood, BeCool, AFCO, Tanks Inc, Holley / Hooker, Ultimate Headers, Rick's Tanks, Moser Engineering, Currie, TechAFX, Stainless Works, II Much Fabrication, and many more
06-14-2014 #3
Registered User
- Join Date
- Dec 2004
- Location
- California
- Posts
- 794
I will have to look into Jethot, thanks for the advice. I just wonder if they will do a script on the calipers for me.
06-14-2014 #4
Registered User
- Join Date
- Apr 2012
- Location
- Woodstock, IL
- Posts
- 2,410
Recommendations for disc brake powder coating?
I'm sure they could! I've never seen that done on calipers before, just the headers.
-DaleSchwartzPerformance
The leader in bolt-in muscle car chassis
SchwartzPerformance.com | GMachineChassis.com | Facebook | Twitter | Instagram
Dealer for: Forgeline, RideTech, Tremec, American Powertrain, Silver Sport Transmissions, GM Performance Parts, RECARO, Cerullo Seats, TMI Products, Vintage Air, Baer Brakes, Wilwood, BeCool, AFCO, Tanks Inc, Holley / Hooker, Ultimate Headers, Rick's Tanks, Moser Engineering, Currie, TechAFX, Stainless Works, II Much Fabrication, and many more
06-17-2014 #5
Registered User
- Join Date
- Dec 2008
- Location
- Detroit
- Posts
- 2,665
I've seen lots of guys on the Corvette forum use this guy known as Mike the Powdercoater with good reviews. I plan on using him to do my Z06 calipers
http://www.thepowdercoater.com/Big dreams, small pockets....
Chris--
'72 Cutlass S LSA/T56 Magnum
Bowler Performance, Forgeline, Speedtech, ATS, Speartech, KORE3, Ridetech coilovers
Project Motor City Madness
06-19-2014 #6
Registered User
- Join Date
- Dec 2008
- Location
- Detroit
- Posts
- 2,665
Shep,
I just looked at your thread and see you have the C6 Z06 calipers. Mike the Powdercoater will put those logos back on once he's done. He will not sell the decals seprately though.Big dreams, small pockets....
Chris--
'72 Cutlass S LSA/T56 Magnum
Bowler Performance, Forgeline, Speedtech, ATS, Speartech, KORE3, Ridetech coilovers
Project Motor City Madness
Reply With Quote
