LS engine Custom Cam-single bolt

[LSXperformance]

Well I grind my own cams and had a customer that felt this cam was a little on the aggressive side for his LS3, m6 2010 SS. So I ground him a cam that would better suit his needs. So I have this one up for grabs if anyone is interested in it. It has an aggressive Lopey idle and a very strong mid range. Can be used with a small shot of nitrous under 150.

Specs are 235/[email protected] 112lsa+5 .621/.609 lift on 1.7 rocker. Gains were 80hp/55ftlb @tire on a stock ls3 m6 with headers, and cold air intake.

His complaint was that low speed rpm driving the car would buck. I feel a stalled auto with a 3600 stall and 373+ gear would help greatly. Anyhow my loss your gain lol. 320$ Obo

Any questions let me know, and if you need the additional parts needed for cam install I can get you that also new from comp cams.

This is the cams first start up vid so you have an idea what it sounds like...
http://youtu.be/Sek0Jpj08f4

[1nastyZ06]

What kind of power and torque was he putting to the ground with this cam? And what other mods did he have?

[LSXperformance]

Just did 440/400ftlbs@ tire on a mustang dyno, with a terrible tune. Had stainless works headers, and an airaid cold air intake. Were gonna see if we can sort out the tune with a different tuner and run it. The tune was terrible and was surging at idle. I have another cam that will be for sale that is a lil smaller than the one above. The other one is brand new tho it's much more tame but still has a nice muscle car tone. It typically makes 425/380 @ tire on a mustang dyno. An it would be good with a blower as well I've had it over 700wheel 650tq @ 10psi on e85 on stock ls3's in the past.