musclecarmatt
12-08-2013, 02:53 PM
Hey guys...I was wondering who all else runs canton racing oil pans on here...and wondering about their quality on their oil pans...I replaced my oil pan gasket twice on my 357 SBC...where it leaks on the back lip of the pan in one spot twice...leaks no where else..the block is dry front and rear...leaking around the gasket to pan.....used silicone but still leaks...I used their stud kit with their gasket and pan...had hard time also getting the lock nuts started cause they where binding on the pan...mite end up reusing the stock pan when I pull the motor back out in few weeks....
Matt
Matt