New Dash and Console Install

[MCI]

The dash and console are in. The upholstery shop should be done soon.
This kit will be covered in black vinyl and the gauge panel and 4 speed shifter plate will be hi gloss carbon fiber.

78761

78762

Mike
MCI
[email protected]
260-602-7651

[bhays]

Looks sharp

[spacepirate]

What vehicle is this?

[MCI]

What vehicle is this?

This is a late 70s Z28.

[instro84]

Looks good, third gen TA seats?

[CKreations]

Are you guys making the dash to sell?

[MCI]

Are you guys making the dash to sell?

Yes, this dash kit is available.

Mike
MCI
260-602-7651

[Power]

Do they make anything similar for a 67 Nova?

[raustinss]

Any plans for a 70 chevelle dash...and console

[MCI]

Do they make anything similar for a 67 Nova?

We can make this dash fit a 67 Nova.

Mike
MCI
260-602-7651

[MCI]

Any plans for a 70 chevelle dash...and console

This dash/console kit and our 69 Camaro dash/console kit will fit in a 70 chevelle.

Mike
MCI
260-602-7651

[GRNOVA]

Oh Mike those are looking sweet! Anything for a 1st Gen Nova? Oh like 65 with a full length console? Maybe in carbon fiber...

[MCI]

Oh Mike those are looking sweet! Anything for a 1st Gen Nova? Oh like 65 with a full length console? Maybe in carbon fiber...

We can make what ever you want.

[MCI]

Some better pictures of the console that goes with this dash.

80652

80653

80654

[switchblade327]

That looks great, especially the console! What are the materials used? The last three images look like 3d renderings. Are these 3d printed somehow? Ballpark price on a console?

It's a little strange to see an interior this custom over a 4 speed/no overdrive :P

[Schwartz Performance]

That looks great, especially the console! What are the materials used? The last three images look like 3d renderings. Are these 3d printed somehow? Ballpark price on a console?

It's a little strange to see an interior this custom over a 4 speed/no overdrive :P

They're made of fiberglass, and come in a white coating like the pics show. I don't think they're renderings!

-Dale

[scott_fx]

impressive!

[MCI]

Some updates

83414

83415

83416

Mike
MCI
260-602-7651

[CKreations]

Sorry to be completely off topic, but Mike, you think you could throw a link to your site in your Signature line? Make it easier for all of us that like what we see in your posts to throw money at you!

[CKreations]

Just Sayin'....

[Damn True]

Great lookin stuff Mike.


...BTW, you have an email from me in your inbox.....which you'd answered just seconds before this post was made.

LOL

[perry mitchell]

I'm still waiting for your new door and quarter panels to show up on your web site with prices. Please

[Damn True]

Sorry to be completely off topic, but Mike, you think you could throw a link to your site in your Signature line? Make it easier for all of us that like what we see in your posts to throw money at you!

FYI, there is a link to his site in the column to the right.

[MrQuick]

FYI, there is a link to his site in the column to the right.

which needs updating...just sayin! LOL

[Damn True]

which needs updating...just sayin! LOL

The column or the website?

[CKreations]

FYI, there is a link to his site in the column to the right.

Ya, I know it's there somewhere, I'm just saying make it as easy as humanly possible for customers to get your product right?

[scott_fx]

just curious about installation. is this something that takes a lot of modification to fit in? do you need to remove the windshield and do you make these to fit a '66 chevelle?

[MCI]

just curious about installation. is this something that takes a lot of modification to fit in? do you need to remove the windshield and do you make these to fit a '66 chevelle?

What measurement do you have between the A pillars, across the top of the dash and with the A pillar covers removed. If it is between 55 and 56 inches it will fit.
It requires some mounting points, you won't need to do any trimming on the dash.

[dave c]

what brand of beal is that?or did you make it?i have a 70 rs that the dash pad is wasted and the bezal and cluster are pretty rough.im puting a 4l80 in it and trying to deside on gear drivin spedo or electric.

[Twentyover]

Likin' the texture on the surface. How is that achieved?

[MCI]

Likin' the texture on the surface. How is that achieved?

That is a 4 way stretch automotive interior vinyl.

[Twentyover]

Any padding between the vinyl and the glass? or is it a pretty but hard surface? You make the vinyl? If not, will you share manufacturer or where it can be sourced?

Like the Camaro IP (reminds me of the one in my 70 Camaro:)).Can it fit in a 65 A body?

[MCI]

Any padding between the vinyl and the glass? or is it a pretty but hard surface? You make the vinyl? If not, will you share manufacturer or where it can be sourced?

Like the Camaro IP (reminds me of the one in my 70 Camaro:)).Can it fit in a 65 A body?

This dash will fit most cars with at least 55 inches between the a pillars.
The material is called Enduratex, also known as Endurasoft 4 way stretch vinyl.
The dash itself is made of 3/16 fiberglass with a white gel coat finish. When covered with vinyl it is hard without any padding between the fiberglass and vinyl.

[chuckd71]

Any pics of a console in an A body?

[Fras]

Mike
What's the best way to place an order for a center dash piece for a double din for a 68 camaro?

[MCI]

Any pics of a console in an A body?

I will make some calls. There are some out there, but I don't have any pictures.

[MCI]

Mike
What's the best way to place an order for a center dash piece for a double din for a 68 camaro?

If you get on our website and go to the options page, you will see a Paypal button for the part you are looking for. That is our 67 68 angled dash panel. www.modernclassicsinteriors.com

[Fras]

Thank you! Is that angled dash panel for a Double Din? Do you have any pictures of one installed?

[Fras]

Disregard. Ended up going to "house of sound". Left you a voicemail, an email, a private message, and a post since February 4th with no response. I'm sure you're very busy, so best regards. You have a nice product for sure

[Tommy ChooChoo]

I'm new to this site and trying to find someone or a company that makes custom consoles for a 71 Nova, bucket seats, 5 speed. I have a custom dash and don't want gauges in the console. What I would like instead is an area for the radio and a high enough area between the seats that opens for storage and doubles as arm rest. Cup holders I would like behind the stick closer to the arm rest. I can go on and on but need to find someone that builds them first. My e-mail is [email protected]
Any information would be appreciated.
Tommy

[MCI]

I'm new to this site and trying to find someone or a company that makes custom consoles for a 71 Nova, bucket seats, 5 speed. I have a custom dash and don't want gauges in the console. What I would like instead is an area for the radio and a high enough area between the seats that opens for storage and doubles as arm rest. Cup holders I would like behind the stick closer to the arm rest. I can go on and on but need to find someone that builds them first. My e-mail is [email protected]
Any information would be appreciated.
Tommy

Hey Tommy,

Check out our website www.modernclassicsinteriors.com
We have a few choices for the 71 Nova. Our Gen 2 is a good all around console, we can modify it to get the fit just right.

Mike
MCI

[chui1980]

Hello Guys and Hello Mike. I just joined this forum and I came across this topic which got me a bit curious. I have a 69 Lemans Custom S that I wish to do custom interior. It is a protouring car so interior must match suspension if you know what I mean. How can I incorporate this dash to my car. If so what should I expect during the process. It is a GM-A Body

[g-machine]

Yes, this dash kit is available.

Mike
MCI
260-602-7651

I looked on the website but cannot find any information.

Thanks,
George

[MCI]

Hello Guys and Hello Mike. I just joined this forum and I came across this topic which got me a bit curious. I have a 69 Lemans Custom S that I wish to do custom interior. It is a protouring car so interior must match suspension if you know what I mean. How can I incorporate this dash to my car. If so what should I expect during the process. It is a GM-A Body

Our Gen 2 dash can be made to fit most 60s and 70s cars, we just need a few measurements.
There will be some trimming and fitting on your end, but we can modify the width, depth, and column location on this end.

Mike
MCI
260-602-7651

[MCI]

I looked on the website but cannot find any information.

Thanks,
George

Hey George,

We should have this dash up on the website soon, if you need some info contact Mike at 260-602-7651
or email at [email protected]

[Power]

Mci how are you guys doing the rear door panels? Any pics?

[randysricksaw]

Nice work!!!