Results 241 to 254 of 254
Thread: 66 Mustang Restomod Project
-
03-22-2024 #241
-
03-22-2024 #242Registered User- Join Date
- Mar 2009
- Location
- Salina, KS
- Posts
- 7
Great looking build. It definitely give me some good ideas for my 65 Coupe project. What vehicle applicaiton did you use for the roll cage?
03-22-2024 #243
03-22-2024 #244Registered User- Join Date
- Mar 2009
- Location
- Salina, KS
- Posts
- 7
That's great. I had contacted them to see how the fitment was in these cars and they didn't have any pictures or info really. I was hesitant to order it without see some sort of pictures on the fit. I'd have to say it looks good and I will be ordering one before long. Thanks again.
03-22-2024 #245
03-24-2024 #246I built a little kick out on the rear valance to clear my fuel hose fittings.
03-27-2024 #247Making the underside and engine bay a different color than the outside turned out to be much more difficult than anticipated.
03-31-2024 #248The front suspension is going on. I set the initial caster (3°) and camber (0°) after lots of fiddling around.
4 Weeks Ago #249The front suspension is on and the sway bar has been mounted. The steering rack is also in place.
4 Weeks Ago #250Got the underside of the hood finished up and painted so I could try out another color on the top. I am going to shoot it with Destroyer gray and white pearl ghost stripes.
4 Weeks Ago #251really cool build.
i like
i like
i like...life is too short, live for today, tomorrow isn't guaranteed
4 Weeks Ago #252
3 Weeks Ago #253I finally got back to finishing up the rear bumper. It wasn’t even on the back and sat up too high off the rear valance.
1 Week Ago #254Ok, I welded the rear valance in place and cleaned up the rear bumper a bit.