Results 1 to 14 of 14
-
03-19-2013 #1Registered User
- Join Date
- Aug 2004
- Posts
- 538
Two new Vent Products from II Much Fabrication
Announcing two new options for venting from II Much Fabrication which round out the II Much Vent lineup. Although our bulkhead mounted vent is still the simplest option for fuel or diff venting, requiring only one hole and one hose for installation, it's not suitable for every configuration. These new vents are priced at $199.00 for in-car mounting (using an external filter), and at $209.00 with integrated filter for under-car mounting
Both our new vents are in stock and ready to ship.
Please head over to www.iimuchfabrication.com for more info and to order.
Left to right -- our original bulkhead mount design, side mount, side mount with integral filter.
$199.00
$209.00Last edited by parsonsj; 03-19-2013 at 11:24 AM.
-
03-26-2013 #2What type of filter could you use for "in-car" mouting option. Like a K&N value cover filter - running from your product monuted in the trunk with a hose to go under the trunk floor pan?
I would consider using on my fuel injected Rocky Valley Tank - no vent in tank - but have a vent on the filler neck - ridetech gas cap and filler neck. A small hose run down the filler neck below the trunk pan to vent the tank - but gas smell is very strong.
03-26-2013 #3