Results 1 to 1 of 1
Thread: rubbin'
-
09-06-2004 #1
Registered User
- Join Date
- Aug 2003
- Location
- Prescott Valley, AZ
- Posts
- 820
rubbin'
Ok here’s the prob.
I have stainless steel brake company rear disks with “floating” calipers. The driver’s side caliper is barely rubbing against the rotor (and squeeking). Not the “floating” part but the part that holds the pistons. I thought that this part was to be away from the rotor by 1/8 – ¼” am I wrong? The pads are fine. What do I do to fix this?
-
Reply With Quote
