Results 1 to 3 of 3
-
11-17-2012 #1
Registered User
- Join Date
- Sep 2005
- Location
- FL and Calif.
- Posts
- 299
Russel fuel filter adapter fittings? Good or not?
Do these russel AN adapter fittings work as supposed with corvette fuel filter/regulator ?
Or are there any other choices ?
-
11-17-2012 #2
Registered User
- Join Date
- Sep 2010
- Location
- Beach Park IL
- Posts
- 2,849
They work great but here are the part numbers for the better fittings. The push on style have a habit of coming apart, these actually thread together and do a much better job.
The correct fitting for engine fuel supply isRUSSELL PUSH-ON EFI FITTINGS (SCREW IN END CAP)
-6 AN Male to 5/16" SAE Quick-Disconnect Female - Blue 644110 - Black 644113 Return for filter shown
-6 AN Male to 3/8" SAE Quick-Disconnect Female - Blue 644120 - Black 644123 Feed from pump
-8AN Male to 3/8" SAE Quick-Disconnect Female - Blue 644130 - Black 644133 - Feed from pump in -8
More info here. http://russellperformance.com/mc/ada...fuel-efi.shtml6 AN male to 3/8" SAE quick-disconnect male 640940 and only comes zinc plated.Donny
Support your local hot rod shop!
11-17-2012 #3
Registered User
- Join Date
- Sep 2010
- Location
- Santa Clara, CA
- Posts
- 620
Fragola also makes a black push-on but I can't vouch for it--491989BL for a -6 x 3/8" male. But I think I would go with the Russell stuff that has the screw in end cap--in fact, I did.
Steve
Reply With Quote
