13th BullDawg MuscleCar & RnD Fabrication Meet & Greet Saturday October 13th ACWORTH

[SparkyRnD]

13th BullDawg MuscleCar & RnD Fabrication Meet & Greet Saturday October 13th ACWORTH

Saturday October 13th, 9am will be the next BullDawg MuscleCars Meet & Greet. Bring a fold-out chair if you want, and come hang out! We will have donuts and some drinks. Everyone is welcome to come, and it will be very informal. Just car people hanging out for a few hours (at least from 9am to noon, usually later).

Directions:
From I-75, take exit 277 for GA-92 toward Acworth (if coming up 75N, turn left; if coming down 75S, turn right). Hwy 92 turns into Cowan Rd. From the exit, you will go about 1.5 miles and dead end into Main Street at the Old Day's Chevrolet site. Turn right, and BullDawg MuscleCars will be up about 1/8mi on the left (directly across from the old location).

The address is 4659 South Main Street, Acworth, GA 30101. Look for the Bulldawg logo on the front of the building. There is parking all along the front and side of the building, and possibly next door.



Here is a PDF I made up that you can download & print if you know of other people that would like to come out, or if you see cool cars and you want to stick one under their wiper:
http://www.rndfabrication.com/images/Flyer.pdf

[Grim]

Having one for November?

[SparkyRnD]

as far as I know

[Grim]

Cool I want to see the Buick chassis. Hopefully it won't e be too cold.

[SparkyRnD]

it is an olds, you were right the first time ;)

Unfortunately though, I found today that the powder coat is scratched down to the metal on the rear. So it will need to be take apart, brought back to the blasters and redone.