Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 14 of 14
    1. #1
      Join Date
      Aug 2004
      Location
      Maine
      Posts
      577

      custom interior is in!

      Hey everyone! Just wanted to let you know that I've finished up my new interior (well, except for a few little odds and ends) and have put up the pics on my website. Take a look!

      Pics of the finished product are here...

      www.geocities.com/boodlefoof/newinterior19

      if you want to see it from start to finish, go here...

      www.geocities.com/boodlefoof/newinterior



      If Geocities shuts me down for exceeding bandwidth, just check later. = )
      John





    2. #2
      Join Date
      Jul 2002
      Location
      Muskegon, MI
      Posts
      4,494
      Luckily I got to see many of the pics before the site shut down. Turned out really nice.
      Adam_______Offical Car Name "ILLUSION"
      383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
      ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign

    3. #3
      Join Date
      Jun 2002
      Location
      Long Island, NY
      Posts
      11,342
      Country Flag: United States
      Looks good!

    4. #4
      Join Date
      Aug 2004
      Location
      Maine
      Posts
      577
      Thanks guys!

      Yeah, that darn geocities... they shut me down for a few hours every so often.
      John




    5. #5
      Join Date
      Nov 2003
      Location
      michigan
      Posts
      1,232
      very nice.....I like the center cluster!!

      colt45
      colt zantop

      1968 camaro LS1.......aka......."NJECTED"

    6. #6
      Join Date
      Aug 2004
      Location
      Florida
      Posts
      42
      That looks really nice! Good job.
      "Give me a lever long enough and a place to stand, and
      I will move the earth."

      --Archimedes

    7. #7
      Join Date
      Aug 2004
      Location
      Maine
      Posts
      577

      thanks

      thanks everyone.

      On another note... I just took it out for its first drive with the interior all in today... man, it is much QUIETER than it was with the old interior. I put down 2 layers of "FatMat" on the floor and up the firewall as far as it would go... plus two layers on the package tray and rear firewall I fabbed up.

      I still wouldn't say it is "quiet" but much quieter... I can have a conversation in the car now... even with those Flowmaster 40s rumbling.
      John




    8. #8
      Join Date
      Jun 2002
      Location
      Oregon
      Posts
      1,387
      Country Flag: United States
      Looks good, that's what I had in mind for my carpet too (using a cut pile from ACC)!! One question though, how come the carpet isn't under your front seats? Does it come that way or did you trim it for some reason??
      Tony

    9. #9
      Join Date
      Aug 2004
      Location
      Maine
      Posts
      577
      What do you mean by "not under the front seats? Are you are referring to the fact that the seat mounts I made are on top of the carpet? I guess it does kind of look from the one side like that is the bare floor showing through... That is just because I haven't gotten around to doing the final fitting on those brackets yet. I assure you, the carpet gives full coverate like the original.
      John




    10. #10
      Join Date
      Jun 2002
      Location
      Oregon
      Posts
      1,387
      Country Flag: United States
      Thanks John!! I was a little worried that the carpet didn't cover the floor completely...I feel better now and will buy from ACC!! What was the cost of the carpet by the way??

      Again looks good!!
      Tony

    11. #11
      Join Date
      Aug 2004
      Location
      Maine
      Posts
      577

      cost

      If I remember right, the whole shabang came out to about $240 shipped... that was with an extra three yards length (at $20/yard).
      John




    12. #12
      Join Date
      Feb 2003
      Location
      Houston, TX
      Posts
      3,446
      Country Flag: United States
      Looks great! I'd only suggest doing something to make the cheap racing seats match the gray interior. Maybe have them re-covered in gray cloth or something.
      Co-Founder, LS1TECH.com


      Forged Wheel Dealer, Contact me for a quote!
      www.DV8Motoring.com

    13. #13
      Join Date
      Aug 2004
      Location
      Maine
      Posts
      577
      Yeah, seats where the best I can afford at present. I do like the color contrast personally, but if I could I'd probably make them grey with some kind of black trim. Someday... when I tear the car apart and start over! The first time through has just been a learning process.
      John




    14. #14
      Join Date
      Jun 2003
      Location
      Chicagoland
      Posts
      835
      The interior looks great.
      William Rouleau
      Project PonySnake - '67 Mustang Fastback