NEW ATS AFX chevelle camaro spindles for sale NIB

[TN10.5Guy]

I have a set of new in box ats afx spindles for sale. I bought these in anticipation of building my 70 chevelle pro touring project. I have since found a new direction and am going to let these go. They have only been removed to take pictures.

Asking 1000.00 plus shipping and paypal fees. I will take cashiers check or money order, but spindles will not be shipped until check is cleared.
shipping will be a flat 30.00





NEW PRICE

[Rick D]

Are these the short or tall? Also you have listed as Chevelle or Camaro, which are they as Speedtech has two different part number for Chevelle and Camaro??

[TN10.5Guy]

these are the tall spindles. i called speedtech and they said the a body and f body spindles have the same ball joint tapers, so the spindles are the same, just different steering arms.

[TN10.5Guy]

i will get the part #s when i get home

[TN10.5Guy]

i also have some more parts for sale if anyone is interested:

Magnafuel pro star 500 pump, -12 inline fuel filter, large 2 port carb reg w/ boost reference, all fittings and adapters. Had fuel in once, never run just mocked up in car. 650.00 complete


kirkey pro street aluminum seat w/ cover seat has been shortened on back to fit with sliders in car 150.00 together new

american racing trakstar wheels (2-15x10 4 in b/s 5on4.75) rears are full polish and (2-15x4 2.25 in b/s 5on4.75) front centers are anodized)Mocked up wih tires but never drove on. rears are drilled for bead screws. 1250.00 for the set


-9" ford rear built by moser eng. for a body. custom width for 10" wheel and 4" b/s
-backbrace, fill and drain plugs, stock suspension brackets, coilover brackets and anti roll bar brackets installed
-full moser aluminum center section (thrubolt design) w/ 35 spline light spool, aluminum daytona pinion support, 4.86 richmond gear, 1350 chromoly yoke
35 spline gundrilled and star flanged axles w/ 5/8 studs
asking 2250.00 complete or will seperate center section out

[TN10.5Guy]

surely someone needs a set of spindles! or some drag racing parts!

[bmiller]

surely someone needs a set of spindles! or some drag racing parts!

do the spindles come with the a-body steering arms?

[TN10.5Guy]

no, i dont have them, but ther is a set on here i saw today

[TN10.5Guy]

need all of this gone

[TN10.5Guy]

any interest?

[parsonsj]

I have expressed my interest...

[TN10.5Guy]

Im not giving them away. I refuse to lose 400.00 on them

[parsonsj]

You seem like you have a plan. Hang in there.

[TN10.5Guy]

still available. will trade for a set of l&h spindles for a body

[TN10.5Guy]

Spindles sold

[jessie]

i also have some more parts for sale if anyone is interested: im interested in front wheels if interested in seperating

Magnafuel pro star 500 pump, -12 inline fuel filter, large 2 port carb reg w/ boost reference, all fittings and adapters. Had fuel in once, never run just mocked up in car. 650.00 complete


kirkey pro street aluminum seat w/ cover seat has been shortened on back to fit with sliders in car 150.00 together new

american racing trakstar wheels (2-15x10 4 in b/s 5on4.75) rears are full polish and (2-15x4 2.25 in b/s 5on4.75) front centers are anodized)Mocked up wih tires but never drove on. rears are drilled for bead screws. 1250.00 for the set


-9" ford rear built by moser eng. for a body. custom width for 10" wheel and 4" b/s
-backbrace, fill and drain plugs, stock suspension brackets, coilover brackets and anti roll bar brackets installed
-full moser aluminum center section (thrubolt design) w/ 35 spline light spool, aluminum daytona pinion support, 4.86 richmond gear, 1350 chromoly yoke
35 spline gundrilled and star flanged axles w/ 5/8 studs
asking 2250.00 complete or will seperate center section out

are you willing to sell front wheels alone

- - - Updated - - -

are you willing to sell front wheels alone

[chaosrob]

brother you may need a specially equipped sports car and a flux capacitor to purchase these.....

are you willing to sell front wheels alone

- - - Updated - - -



are you willing to sell front wheels alone