350z rearend/ 67 camaro

[recycler]

That sucker is downright sexy!
Im in the middle of a build that is similar to your Camaro (71 nova, 95 j30 rear subframe), so ill be watching for updates.
And thanks for updating the thread!

[CliffsBlueCamaro]

Hey overZealous1, how did you mate the Viper T56 to the LS2?

It looks like you used a stock bellhousing, but what did you do about the bigger/longer input shaft? Not much info out there from people with a set up like yours.

[overZealous1]

Hey Cliff. You need to use the regular t56/ls front plate and input shaft. Then the ls bellhousing. You can find used ones, or buy new for not alot of dough either. It is a simple swap, and I did it myself. The best part is that the Viper input shaft and plate is a highly sought after piece to mate a t56 to a bbc. So the sale of that will pay for new ls parts. Thats it.

[CliffsBlueCamaro]

Awesome, thanks for the info! I have a Viper T56 behind my SBC right now, but I've been looking into what it would take to go LS. Swapping the mid-plate and the input shaft seem like the cleanest and most simple option. I have read of people who say they tried swapping to the LS1 input shaft but that the gears were ground at a different angle. I'm glad to know that this isn't really the case. Thanks again for your help!

[RIDES BY DESIGN]

Any updates on this one?

[TheBandit]

Any progress on this lately?