Results 1 to 4 of 4
Thread: Ls1 spark plug leads
-
09-04-2011 #1
Registered User
- Join Date
- Oct 2009
- Location
- Brisbane, Australia
- Posts
- 65
Ls1 spark plug leads
I have headers on my LS and the msd leads need replacing. The coil end is as per stock but the plug end is the straight type which have to be ziptied away from headers. I'm thinking 90 deg will work better. What is used by you guys? Pics if you have any?
-
09-04-2011 #2
Registered User
- Join Date
- Jul 2006
- Location
- Pensacola, FL
- Posts
- 1,263
I used Taylor wires. The plug end boot is shorter & has an approx 135 deg angle. Cleared all the tubes on my stainless works headers. Can get pics in a few days, im out of town.
09-05-2011 #3
Registered User
- Join Date
- Jun 2011
- Location
- Brooklyn, NY
- Posts
- 195
I used custom length wires from Magnecor, and ordered them with 45deg boots. Cleared my American Racing Headers
09-24-2011 #4
-Moderator/Sponsor-
- Join Date
- Jun 2001
- Location
- Newbury Park, CA
- Posts
- 5,822
Cut the end off of the MSD wire and add your own end. I used the NGK screw-on ends and they work very well. http://www.kingsbornewires.com/categ...?categoryId=98
VaporWorx. We Give You Gas http://www.vaporworx.com
Reply With Quote
