Upper Control Arm Bushing Sleeves

[astroracer]

For all of you suspension fabricators out there here is a nice piece that will make life easier.

I am working with Jim Fairbanks of A & A Manufacturing to machine up a set of upper control arm bushing sleeves for my Bad Ast Project. These sleeves are designed around the Moog #K6176 upper control bushings. These bushings are used in just about every vehicle GM ever made, F-Bodies, G-Bodies, B-Bodies and A-Bodies. These should be very versitile with stock or aftermarket bushings and ,at around 6 dollars or so ea., are very cost effective.
Here is a pic of what I am doing. The sleeve will carry the bushing on the cross shaft.


Jim needs to run 100 of them for a trial and he needs to have 50 of them committed to sell.
I will get 8 so that only leaves 42 to pre-sell.
If you have any interest at all in these give Jim a call.

A&A Manufacturing
19033 174th Ave.
Spring Lake, MI 49456
Mon-Fri 7:00am to 4:30pm est.
Phone: (616). 846. 1730
Toll Free: (800). 473. 1730
Fax: (616). 846. 5999