Results 1 to 5 of 5
Thread: 1 3/4" chromoly thick wall
-
02-14-2011 #1
Registered User
- Join Date
- Aug 2009
- Location
- wisconsin
- Posts
- 194
1 3/4" chromoly thick wall
I need to find some chromoly in 1 3/4" that has a thicker wall, like .100 or so for some shock mounts. I dont need much, and I need it bent, I only have dies for 1 5/8". So a piece that is bent over 90 degrees would do just fine. Anyone have a source for me? Thanks
Mike
-
02-15-2011 #2
Registered User
- Join Date
- Oct 2010
- Location
- Los Angeles
- Posts
- 5
you might try these guys, not too far from you- Jim
http://autoweldchassis.com/index2.ivnu
03-07-2011 #3
Registered User
- Join Date
- Aug 2006
- Location
- Vinland Kansas,66006
- Posts
- 647
Mike, If you are still looking for a bent pc.1.75 x.120 4130 tube I can help you out.Shop phone 1.785.594.7481 call me and let me know what you need.Scott
05-24-2011 #4
Registered User
- Join Date
- Aug 2009
- Location
- wisconsin
- Posts
- 194
Just wanted to say thanks to Coolwelder62 for helping me out with some tubing. Thanks Scott!
05-26-2011 #5
Registered User
- Join Date
- Aug 2006
- Location
- Vinland Kansas,66006
- Posts
- 647
Sorry it took me awhile to get that tubing to you.
Reply With Quote
