Project Spectre - Bring the rain

[racedaddy]

OK so I'm going to start my build thread. I hope this will keep me motivated enough to continue work on it. This is a father son build. I got this car for my oldest son this Christmas.

My son and I talked it over about our plans. We like the Chicayne (Troy built car from 2003) look so maybe we'll go for that.

This won't be a high calliber build like alot of the ones I follow on here but it will be more of a poor man's build. I know Chicayne is far from low budget but we'll see what we can do. We'll use as many production parts as we can.

Our car is a 63 Fairlane 500 with a 289 2 speed auto.


First thing is to repair the rusty front frame so we can put it on the road and begin collecting parts.



Good ol' Mountain Dew frame template!


Next is to begin adapting a 2000 Mustang front suspension on the Fairlane. If anyone has experience in this area please let me know.

[racedaddy]

Got the rust repaired on the frame and now looking at a tune up to get the thing driveable so I can see what's working and what isn't.

[Crazed]

I'll be watching this one, Have a '64 myself.

[irregal83]

like the project man, ill be looking for updates.

[85coupe50]

Will be watching this too as I have a 64 fairlane...

[56pickup]

Great project! any updates?

[racedaddy]

Sorry haven't updated in a while. Me and my boys have been building a 66 Chevy truck.

We did begin installing a new electronic distributor in the 289. The points distributor took a little effort to get out. I ended up tieing it to my cherry picker, lifting the car up (yes the distributor was carrying the weight of the front of the car) and smacking it with a dead blow hammer several times before it gave way and came out.

[BulldawgMusclecars]

Ford distibutors can be a pain to get out sometimes! You might want to check with Mustangs Unlimited on a front frame section...could save you some fab time, and they are fairly inexpensive. Nice project!