1967 Mustang Fastback- Project "Hemihunter"

[All4rocks]

This build started a few years ago with a running 67 fastback 289 4 speed car. It was going slow at first due to a lack of funds but now has accelerated rapidly. The car was dissasembled, sandblasted on a rotisserie, and metal work has started. The fiberglass pieces are all on only for mockup. All scoops, rear spoiler, ground effects are being made in steel by myself.

I am doing a pro touring 67 Shelby GT500 Super Snake especially since the car has an original 1967 427 side oiler.
The entire car will be made of steel. No fiberglass. All body panels are going to modified in some way with very subtle changes.

[All4rocks]

These pics are of the car when first started. The Rod and Custom Motorsports front suspension is installed. Metal work was just beginning.

[All4rocks]

Build specs: 1967 Ford 427 Side Oiler with Tunnel port heads stroked to 454 CI. 630 HP
Tremec T56 6 speed trans
Quicktime Scattershield bellhousing
air ride Technologies on all 4 corners
air ride 4 Link Rear suspension
345/30/19 rear tires
275/35/18 fronts...trying to get 295's to fit
Wilwood 14" rotors and 6 piston calipers

[All4rocks]

here is a pic of the engine when i first got it. A pic of the tunnel after being cut out to fit the 6 speed trans.

[All4rocks]

Shock towers were removed and custom inner fender panels and radiator support were made

[cobragt]

Nice! We need more Ford powered Mustangs on here!

[All4rocks]

engine compartment smoothed and inner fenders and rad support finished

[All4rocks]

New steel upper scoops made and ready to install

[All4rocks]

Car rolled out of shop last week on its new suspension. Wheels are for mock up only, not the ones being used.

[All4rocks]

New steel Quarter extensions made. This weekend i will be making the rear spoiler.

[All4rocks]

Upright images!

[linkstar69]

Great fab work

[XLexusTech]

Hey... few comments.... Love the name... even thought I am not a fan of naming cars....
Love the old school fight fire with fire (427 side oiler) thats pretty awesome..
Love the fabrication and metal work!

Awesome.. good luck with your build!

[All4rocks]

Got the mini tubs done now. Now my mockup tire fits nicely right up in the wheel wells.

[All4rocks]

Pictures of inside a 427 Tunnel port motor. You can fit a golf ball down the intake ports.

[All4rocks]

Im looking for opinions on the new lower scoops. Its a cheezy mock up piece but i think you will get the idea.
1st pic of the scoop with radius on upper and lower sides

Or:

2nd pic of scoop with radius on top and flush on bottom.

Any thoughts?

[Scottem]

In terms of body lines and angles, I think the photo on the left plays into the rest of the car a little better.

[craigs73]

In terms of body lines and angles, I think the photo on the left plays into the rest of the car a little better.

X2 nice fab work

[MAYHEM Customs]

Pretty cool car dude! Gonna be a beauty when you are done with the build! We love Mustangs!!!

[MrForce]

Nice work. Scoop on the left works better IMHO.

Rob