"Just For Fun" MY 69 camaro

[Centerforce]

This build is beautiful! We're tuned in to see what else you have in store for it.

[gardnerme]

Very glad to see this one moving again. Good job, David!!

[gardnerme]

Very glad to see this one moving again. Good job, David!!

And Robert!

[David Sloan]

And Robert!

Roberts doing all the work, I am just hanging around��

[David Sloan]

This build is beautiful! We're tuned in to see what else you have in store for it.

Thanks
I love your clutches ! I have used them many times in different cars

[RS_Customs]

Roberts doing all the work, I am just hanging around��

Ya......I don't know about that one, lol maybe I'm doing all the pictures taking work haha!

[RS_Customs]

We were able to get the front and rear suspension all mounted up in the car and finally took it off the rotisserie a couple weeks ago! That was a major relief to hit that point. One of those, "well maybe next week we can...." for a few months we kept finding more stuff to do that was easier with it on the rotisserie.

[Zoomin]

I would be perfectly happy to have that as it sits in my garage.

[TXsilverado]

this car definitely deserves one of those "built not bought" stickers. Keep it up!

[David Sloan]

Thanks
It is definitely different than buying parts to bolt on
On to what we're working on now. So I had bought a gm ls3 480 hp wiring harness an controller well we went to plug it up an to our surprise the cam censer,map an speed censer will not plug in.
So now iam waiting on parts

[gardnerme]

Still looking good, David!! Glad to see some good progress.

[RS_Customs]

A few more pictures of the progress. After we got it on the ground, David was able to sort out the front brakes and we got them bled and ready for flintstone it! lol

[RS_Customs]

Since the last update we have been working on the wiring for the car, but 1 day a weekend at a time. We set the engine harness on and realized how bad it fit the motor, so decided to fix it. This also allowed us to also make it where the fuse box, computer, data port, and bulkhead / gauge signal wire were positioned in the cabin where we wanted them.

I don't have any pictures of how bad it fit out of the box, but there was easily an extra foot of loom between the tops of the heads to link the injector/coil lanes. You can kind of see it after the loom is off and it's sitting on a spare motor.

[RS_Customs]

Some spaghetti for you! Sorting wires and seeing what needed to be moved.


Starting to get it into shape.

[RS_Customs]

The fuse box and computer will be at the passenger foot panel. This will keep them away from any moisture or heat in the engine bay.

[RS_Customs]

Starting to wrap the wires before the loom.

[RS_Customs]

Looooooooom..... Only went as far to get it into the cabin. There is still a little routing and such to work out once its on the motor and passed through the firewall. We set this up so we will have a larger than normal firewall pass-through that we can pull the fuse box through and not have to pull any wires off the motor. It will be a couple mounting bolts on the fuse box, unplug from the computer and the a/c and starter wires and it's out.

[RS_Customs]

The body harness has also been getting worked on. A lot of the wires have been removed that we don't need and really the ignition, and lights are almost all that remains. The pass-through is being located just under the dash above the trans tunnel. It will be a lot easier to get to the fuses since the cage is an obstacle to get at the factory location. The center console will also have most of what ties into the fuse panel. The ignition switch, turn signals and lights will be there.

David may shoot me for posting pics with him in them, lol after all it is his car!!

[Ron S]

Lookin good David, you are moving right along. What ever happened to us moving real fast on projects? Its all I can do not to go backwards on this stuff. LOL

[David Sloan]

Yea I don't know what happened to getting them done quickly seems like everything I work on now takes 3 time as long as it used too. LOL
Thanks for the interest, I check in on your projects when I have time to get on here. The stang is looking good.