Gen II Viper TPS wire diagram needed

[Larry Callahan]

I am installing a pair of Gen II Dodge Viper throttle bodies on MotiV8r and I'm having a hard time trying to figure out the TPS connection.

Anyone have a wiring diagram?

[MrQuick]

on drivers side TB....96-02

[Larry Callahan]

Thanks!!!

I think it goes like this

Pin 1 = Sensor ground
Pin 2 = 0-5v output signal to my computer
Pin 3 = Switched 5+ volts from my computer

[MrQuick]

you are correct sir.... 2= signal return and 3= 5v reference voltage....shared via splice to other sensors.

Vince

[Larry Callahan]

Thanks!!!

[Larry Callahan]

Now I just need to find a person willing to hack the end of a viper wire harness. I need the connector now.

[Larry Callahan]

Or, can anyone find a picture of this Dodge part number?

5019961AA

[MrQuick]

for the tp sensor? should be the same as your RT.....LOL


I may have a harness at the shop....I'll get Allen to look in a box.

[Larry Callahan]

Thanks for the help but I just found out I wasted your time.

Sorry!

I tried to install it last night and it's way too thick and even the throttle body where the tps mounts touches the waste gate exhaust bypass pipe. So, I'm off to locate a thin reverse rotation TPS to put on the passenger side throttle body.

Oh joy.

[Larry Callahan]

This is the monster size TPS on the driver side TB.



and I need something like this for the passenger side.

[CarlC]

Does RockAuto carry it? It's surprising the stuff they have in the electrical sections.

[Larry Callahan]

I just went to Pep Boys. They let me in the back and I went through about 50 boxes of TPS sensors. I found one from a 1990 Mustang that will work with a small adapter I will make on Monday.

Phew!

[Larry Callahan]

Yes, I goofed and tacked them on a little crooked but you get the idea.