Results 1 to 17 of 17
Threaded View
-
02-08-2010 #1
Registered User
- Join Date
- Mar 2009
- Location
- CA
- Posts
- 20
Procharger with power steering issues - help!
I have searched and searched but have not found anything that can help my situation.
I have a 67 Camaro with a small block. I bought a Procharger D1SC system for my new forged 383. My issue is the power steering; ATI offers a bracket kit for a gen 2 pump which has an idler pulley. I have read that the idler stresses the belt and only lasts about 500 miles. Some have run different belts such as the green and solid in order to last a little longer but this is not acceptable to me.
Is there another setup out there that will work? What are you guys doing out there?
The center of the power steering pulley needs to be 3.25" off the face of the block which creates an issue. Can the ATI brackets be modified so the pump can swivel?
Please help, I can fabricate if someone has some ideas.
Thanks,
Mark
-
Reply With Quote
