Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Page 4 of 4 FirstFirst 1 2 3 4
    Results 61 to 61 of 61
    1. #61
      Join Date
      Feb 2014
      Location
      Georgia
      Posts
      93
      Country Flag: United States
      Since this thread has been brought back to life I'll comment on the FrozenBoost braided PTFE hose and fittings. In my experience it's the worst hose I've ever dealt with. You have to trim back the stainless braids about 1/4" from the end of the PTFE inner hose and the -6 fittings do not fit a -6 AN wrench, have to use an 18 mm wrench to tighten the fittings down. Earl's Speed Flex is much easier to assemble and it's Teflon lined. It cost a little more but you'll easily save the difference in band-aids and donations to the swear jar. You can buy it by the foot and all the fittings from Summit.

      Steve - 1970 Roadrunner



    Page 4 of 4 FirstFirst 1 2 3 4