Lets see your aftermarket seats!! no stock stuff

[CarlC]

Those look great Carl. Did someone local recover them?

Pasadena. Antunez Upholstery. 626-367-2712

[Hotwire]

May not be what you're looking for but didn't see anyone else post them. 2007 Nissan Maxima seats. 6 way power, very comfortable, great side bolsters to keep you in place, only downside is they're on the heavy side. I keep the headrests off of them for driving around town but will throw them back in for long trips.

[TANKMASTERJ]

For some.of you budget conscious go it's I ordered a set of Braum Alpha X seats ack with white piping in couldn't be happier when they got here.the quality has come way up from the earlier seats I seen in some cars.
I'll post pics when installed but here's a seat pic. Again they are not yet mounted but in my shop floor they ride great lol. Seriously the quality looks fantastic. They were a grand shipped to my door. Bought some matching Braum 5 point harnesses and seat brackets. All total about 1400 for pair and hardware and belts. These are definitely onpa alot nicer than the TMI pro car or elites I have owned both. For longevity, only time will tell.

- - - Updated - - -

For some.of you budget conscious go it's I ordered a set of Braum Alpha X seats ack with white piping in couldn't be happier when they got here.the quality has come way up from the earlier seats I seen in some cars.
I'll post pics when installed bh here's a seat pic3

[Alwhite00]

Do they flip forward?

[TANKMASTERJ]

I bought some Braum Racing Alpha X. I know they are a cheaper seat but the Alpha X is way on par with tmi. The newer braums are nice. Check the out. Haven't rode in them yet but sitting in the shop floor they feel great.

[Just 1 More]

Corbeau LG1 wide

20210705_172141 by F G, on Flickr

[TANKMASTERJ]

Braum Racing Alpha X.
Nice vinyl. Nice sliders and brackets. About 1100 shipped to my door. Couldn't be happier.

[mtm87tx]

Corbeau A4 in Suede

[SPLATT71MC]

Scat Procar Rallys

[Anthony k]

[Elbert]

Braum Racing Alpha X.
Nice vinyl. Nice sliders and brackets. About 1100 shipped to my door. Couldn't be happier.

Looking great, man! I'll show this to my buddy tomorrow when I help him install the suspension and mud tires onto his Ranger.

[Perry M]

Attachment 200995Attachment 200994I had a pair of Nissan 300ZX TwinTurbo seats modified and recovered with gray leather for my 67 Camaro. Both driver and passenger seats have 8 way power and heat and massage.

[Motown 454]

I can’t see the pictures, I’d like to check them out. How do they sit, low enough?

[Perry M]

I don't know why they they didn't show up like usual but can't you click on the attachment as I did to see them?

[Motown 454]

Maybe it's on my end this is what I get when I click on it. Invalid Attachment specified. If you followed a valid link, please notify the administrator

[Perry M]

Let’s try this again. I don’t know why they are rotated but let me know if you can see them.

[OldTimer]

Front seats are done and installed. They are 2000 Pontiac Trans Am seats, drivers side has 6-way power plus power lumbar, passenger side is manual rails but also has power lumbar. Front seat rails line up with my ‘69 Camaro mounting holes, but rears needed modifications. DS had to be cut and re-drilled, PS I had to complete cut off rear legs, weld up a new set of legs, then weld those to the cutoff section. A little work, but I love the seats. Rear seat getting final touches then matching door panels.

[Midlife]

Recaro SPD in standard vinyl that I had recovered to mimic the stock seats in my '73 Z28 project.

Had them add inflatable lumbar and seat heaters, while they were at it.

[Blevinator]

The seats in my 66 seats are from Distinctive.
Attachment 198476Attachment 198477

Finally! Deleted headrests! This looks great!

[cdoggy81]

Oldtimer - those 2000 TA seats look great in your 69. I have a manual stock set in my 71 TA right now but was considering replacing them as they are a little worn out & not sure how they would look redone. After seeing what you did they are back on the keep list now :} LoL

Here are my other 3 options:
#2 - Sparco GT Street Seat. Just not sure how much higher they are (as well as the others) compared to the 2000 Trans Am seats I have in there now. According to Summit they are 33.8" high.
https://www.summitracing.com/parts/sro-009012nr


#3 - Corbeau Sport Seats. Nice but I would definitely have to cut down the head rest as they look to be 8" tall alone bringing the total height to 36.5" tall.
https://www.summitracing.com/parts/csu-90010pr


#4 - Procar Touring Series. Overall height is 34" with a headrest height of 6.5. Same where I would / could cut it down 2" or so.
https://www.summitracing.com/parts/sca-80-1680-51l

# honorable mention - Procar Rally 1000 Series.
https://www.summitracing.com/parts/sca-80-1000-51l
They are tried & true in that we know they fit in these cars well & have a good amount of headroom. Total height is 30.5". My only issue is they look a little bulky whereas the other seats mentioned above look a bit trimmer or sportier & still have good bolstering. Because of this I have removed them off my short list.

Thanks everyone & LMK your first hand experience with any of these 4 I mentioned.