Results 1 to 2 of 2
-
04-03-2005 #1
Registered User
- Join Date
- Mar 2005
- Posts
- 52
full quarter replace on 71 camaro
I'm going to try and do this myself also. I'm going to replace the rear tail panel and both outer wheel houses and both rear quarters and rockers. I was wondering if you could share your knowledge,tips and pictures of doing this project. Looked through the search on site ...but i was wondering if someone has done it recent..
I have just finished replacing the two front fenders and inners,radiator support,cowl hood and lower valance on a 71 rs
Thanks
Larry
-
04-03-2005 #2
Registered User
- Join Date
- Aug 2003
- Location
- Wanatah, Indiana
- Posts
- 486
I just finished(just roller it out of the garage today) both rear quarters,outer weelwells,both drop offs and rear tail panel on a 69 camaro. This was the first time to do thisand I had a little help from a friend that was a body man. He showed me how to line up the panels and I did all the fitting and welding. It takes some time and patience but if you are a good welder it should be no problem. I can let you know on some secrets he showed me and any pics that might help. Our cars are different but the process is still the same.
Mark Antrim
Reply With Quote
