Results 41 to 60 of 78
Thread: lunatic's 69 camaro...
-
09-11-2009 #41
if you dont mind me asking , what kind of blower are you using? thanks-dom
Dom Buffa
69 Camaro- 2JZ /Garrett 67MM, Ls1 13" Front disc conversion, 18" ROH 3 piece Modenas
-
09-12-2009 #42Looks like an Weiand/B&M.
Matt Barr.
09-14-2009 #43Registered User- Join Date
- Jan 2009
- Posts
- 45
09-19-2009 #44Registered User- Join Date
- Jan 2009
- Posts
- 45
10-13-2009 #45Registered User- Join Date
- Jan 2009
- Posts
- 45
here's a shot of the frame up on its side... i ground down all the welds today in preparation for doing some painting...
and now with a coat of masterseries paint (better than por-15)
10-14-2009 #46Registered User- Join Date
- Feb 2009
- Location
- johnstown pa
- Posts
- 13
nice work,looks good
11-03-2009 #47Love the low buck approach, what you build and not what you buy. It's exactly what I am doing. It takes a lot of thought sometimes when you just can't get your check book out and buy bolt on parts. Can't wait to see it finished.
"Cowboys Love fat calves."
11-16-2009 #48Registered User- Join Date
- Jan 2009
- Posts
- 45
back to work after a month or so hiatus...
front and rear bars are now in.
12-04-2009 #49any updates? =)
Dom Buffa
69 Camaro- 2JZ /Garrett 67MM, Ls1 13" Front disc conversion, 18" ROH 3 piece Modenas
12-05-2009 #50Registered User- Join Date
- Jan 2009
- Posts
- 45
sorry, nothing new to post at the moment... ive been doing some remodeling in the house and working on some other projects instead... the current hold up is making new rear coil over mounts.
after thats done i'll get the body mounted, engine back in, and start working on floors.
12-05-2009 #51COOL Build!!!! I dig the rims!!!
Brian Embry
LIVE FREE, LIVE HARD, DRIVE FAST!!!!
01-31-2016 #52Registered User- Join Date
- Jan 2009
- Posts
- 45
project resurrected...
life got in the way, wifey took off, money had to go elsewhere, and the car got shoved to the corner of the garage.
a few months ago i finally dragged the car back out of the dust and started in a new direction. Decided C4 suspension would make for a better handling machine...
02-01-2016 #53