Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 2 of 2

    Thread: oil pain on 502

    1. #1
      Join Date
      Aug 2004
      Location
      SoCal
      Posts
      1,008

      oil pan on 502

      Is gasket sealer required on this one piece gasket, and does anyone know where to find the torque specifications on the bolts?



      Thanks,
      Tom



    2. #2
      Join Date
      Aug 2004
      Posts
      33
      You should only need to add a little slicon at the corners on both sides. Not to much of the black goo or you'll never be able to reuse the gasket if you ever need to remove the oil pan or timing cover.

      As for torque specs about 15-20 ftlbs would do it. The gasket has anti squish steel spacers built into it so even if you do over torque the only thing your going to do is break a bolt.