Can anyone tell me some measurements on parking light holes for 69 camaro lowervalanc

[yody]

Hi, can anyone measure for me, the holes for the parking lights on the 69 camaro lower valance panel, also the diameter of the parking lights? thanks!

[yody]

almost 600 views any know one can help? common someone on this site has a 69 camaro

[quadfather]

i assume you want to know how far apart they are? and the dia. i'll measure them tommorow and leave a reply.

[yody]

no, not how far apart, i want to know how big the hole is, in the lower valance that the parking lights fit into, also the diameter of the actual parking lights. Doesn't have to be super exact just a meausrement like 3 7/8' or something like that. thanks

[MuscleRodz]

Hole is approximately 5" dia but i don't think it is pefectly round. If you are serious about doing it, I would get a light first to get the hole right.

Mike

[yody]

I am thinking of taking some 4" optilux drivin glights and using the 69 camaro lower valance parking light holes and graft them into my lowr valance, in the middle. If you look at my sig pic you can see there are 2 vents above my valance, I will have to fill in some of that with metal. I was thinking of cutting out the holes/lips of the 69 and trimming them and then somehow welding it all in and make it look good? i need some drivin glights for my High beams since i am using HID's for my low beams. alos the optilux lights have angel eyes in them. Maybe i will check with marquez designs, i know they sell a kit(without the valance of course!) if the hole is really 5" that is probably too big for the 4" light?

[MuscleRodz]

definitely too big. The Marquez lights are driving lights so I would think they would work great.

Mike

[quadfather]

i measured them today across horizontilly. light is 4 7/8 opening is 5 1/8. hope that helps.

[yody]

thanks a lot!