Results 1 to 7 of 7
Thread: corbeau harness bolts
-
02-06-2005 #1New to Pro-Touring
- Join Date
- Sep 2004
- Posts
- 39
corbeau harness bolts
Hey, I tried to install my Corbeau harnesses in my 69 camaro and the bolts they sent werent the correct size. What have you guys been using to install these harnesses besides the stock ones? That wouldnt be very "pro-touring" to me.
Also, I used a set of ARP vortec intake bolts to mount the CR1 seats to the car. They worked out really nice. Look very trick. Any help you guys can give on these harness bolts would be cool. Thanks.
-
02-17-2005 #2Registered User- Join Date
- Aug 2004
- Location
- Carrollton, Texas
- Posts
- 26
Back seat bolts
I bought some Simpson harnesses and the bolt didn't fit on those either. I ended up using the non-shoulder bolt which is normally used on the rear seat. It should fit if the Corbeau are like the Simpson ones.
Good luck ...............mike
02-18-2005 #3Registered User- Join Date
- Aug 2004
- Location
- Pittsboro, NC
- Posts
- 194
I did the same as Mike with my Corbeau belts
02-19-2005 #4