Results 1 to 5 of 5
Thread: where to mount X pipe
-
01-24-2005 #1
Registered User
- Join Date
- Aug 2004
- Posts
- 345
where to mount X pipe
I have a 67 camaro with a BBC. i have a x pipe set up from summit that needs to be cut to fit lengthwise. my question is where is the optimum place to mount the X pipe, distance from header collector or wherever it should be measured from. thanks
-
01-24-2005 #2
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 15,975
Placement is not super critical. Put it where it fits best.
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @projectgattago
Dr. EFI
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
01-24-2005 #3
Registered User
- Join Date
- Aug 2004
- Posts
- 345
ok thanks. i wasnt sure if placement was a big deal or not. that makes it a little easier.
01-26-2005 #4
Registered User
- Join Date
- Jan 2005
- Location
- San Jose, Ca.
- Posts
- 34
You don't want to install it too far back. When I was doing my exhaust I thought it'd be nice to have it far enough back that I could pull the tranny without moving the exhaust. Problem is that when the suspension de-weights, the drive shaft can hit the x-pipe. I'm in the process of correcting that now....
01-26-2005 #5
Registered User
- Join Date
- Aug 2004
- Posts
- 345
ok, i was under there the other night and im thinking of mounting it around the rear of the tranny. should have enough room there
Reply With Quote
